X10 Community Forum

📸Cameras & Camera Software => AirSight Cameras => Topic started by: jerz226 on March 03, 2012, 07:36:40 AM

Title: Second camera
Post by: jerz226 on March 03, 2012, 07:36:40 AM

I have no problem hooking up my camera wireless.  But when I try to get the second camera working it won't work unless I put the same info in that I did for the first camera.  I emailed support for help and they said to get the internal IP address from the IP Camera Tool.  I can't find out how to do this.  I have looked at everything they show me and they are both the same.  I know I am missing something simple. 

Title: Re: Second camera
Post by: X10 Repair Depot on March 03, 2012, 09:03:10 AM

 jerz226,

Any additional camera will be setup the exact same way as the first one. Once you do this, you should be able to see both cameras in the IP camera tool. Let me know if you are still having any problems.

Title: Re: Second camera
Post by: Dr.Fiero on March 03, 2012, 09:54:26 AM

Hopefully not adding to your confusion....

You set up the 2nd one in the same method, but make sure you're not using the same PORT (80, 81, etc) or the same IP (192.168.0.30, etc) as the first one!

Otherwise they'll conflict, and (probably) neither will work.