X10 Community Forum

💬General Category => General Discussion => Topic started by: neptune769 on April 19, 2012, 02:21:24 PM

Title: CS277 & RWS19 switches
Post by: neptune769 on April 19, 2012, 02:21:24 PM

Hello All,

Does anyone know if the CS277 companion switch can be replaced with the RWS19 companion switch?

Thank you,
Dennis

Title: Re: CS277 & RWS19 switches
Post by: dave w on April 19, 2012, 03:11:41 PM

I have not tried it, but logic would tell me...yes.

If you have one, try it. Nothing will blow-up.

Title: Re: CS277 & RWS19 switches
Post by: Brian H on April 19, 2012, 03:22:14 PM

Should work even if we have to assist you in translating the connections from the CS277 to the RWS19.

One point. The CS277 is the toggle style and the RWS19 is a decorator style. So it looks different. The X10 model of the RWS19 is the WS14A and the X10Pro model is the XPSS.
http://kbase.x10.com/wiki/WS14A

The X10Pro version of the CS277 is a PCW03 if you care to search sites for them.

Title: Re: CS277 & RWS19 switches
Post by: neptune769 on April 19, 2012, 04:19:07 PM

Thank you both for your reply. I will try it and let you know. I figure it probably will but I just wanted to make sure.

Thanks again.