X10 Community Forum
🖥️ActiveHome Pro => ActiveHome Pro General => Help & Troubleshooting => Topic started by: widener on June 07, 2012, 02:55:53 PM
-
B:( I am a newb to x10 camera systems. I just bought a 6 cam wireless system but have been running into issues. My house is a single story brick house @ 2000 sq ft -/+. I noticed that my signal was VERY weak trying to get it through the brick so I installed my receivers outside and the signals are still pretty poor. Does anyone have any advice as to what the max distance for wireless x10 cams are and what I can do to improve the signal? I have 4 cameras pointed along my driveway in different directions and 2 on my storage shed that is less than 50 ft from the nearest receiver. The ones on the house are only 20 ft from my main receiver. Here is a picture of the layout. I can see the ones on the house but they are VERY fuzzy while the ones on the storage shed are very distorted.
(http://i270.photobucket.com/albums/jj112/widenerdavid/bundycamsetup.png)
-
You are switching them On and Off so only one is on at a time? More than one On at a time can interfere with each other.
Are they the Pro Line of the cameras or the 2.4GHz ones?