X10 Community Forum

📸Cameras & Camera Software => AirSight Cameras => Topic started by: turbomentor on July 13, 2012, 12:18:27 AM

Title: Duration of alarm recoriding
Post by: turbomentor on July 13, 2012, 12:18:27 AM

Have got the basics of the camera set up; now working on getting all my alarm settings set up.

Was wondering if there is a set duration for the video to record once the motion sensor is activated? I don't necessarily want hours of video when I'm at work if my cat runs across the kitchen!

Thanks

Title: Re: Duration of alarm recoriding
Post by: dave w on July 13, 2012, 07:20:59 PM

crystal ball to determine what camera and software you are using, isn't working:

http://www.x10.com/support/support_manuals.htm#Cameras

If you are using the old X10 cameras (not the newer Airsight IP models) with X10 motion detectors (xxxEye models), then it is set by the motion detector timing.

Title: Re: Duration of alarm recoriding
Post by: turbomentor on July 18, 2012, 09:54:51 PM

Thanks Dave for the reply.

Using the Airsight XX34A camera with firmware v 17.37.2.41. Brand new out of the box.

Trying to determine the length of the video recording once the motion sensor is activated. Thanks in advance.