X10 Community Forum
💬General Category => General Discussion => Topic started by: rjniles on September 24, 2012, 08:16:32 PM
-
Just saw a Power Flash Module (used) go for $61 plus $3 shipping :o I bought 2 new ones 2 years ago for less than $20 each. I would have stocked up if I had only known B:(
-
Those PFs are a great device!!
I saw CM15As for over $100 on e-bay.
-
Yes I have a few spare Powerflash units myself. Both X10 and X10pro versions.
Word is the new CM15As are going to be around $100. So why take an EBay chance if you can wait a month.
-
I still have a Radio Shack X-10 plug/n power Burglat Alarm Interface.
It sounds like it's the same as the Power Flash.
Would it be?
-
If it is an OEM Powerflash.
It would look similar to the X10Pro PSC01.
http://www.x10pro.com/pro/pdf/psc01.pdf
-
I still have a Radio Shack X-10 plug/n power Burglat Alarm Interface.
It sounds like it's the same as the Power Flash.
Would it be?
Same as the power flash. Want to sell it?
-
I have used an Insteon 2450 I/OLinc with an added X10 address to send X10 On and Off power line commands.
Worked fine on an ELK Doorbell Sensor that also can trigger a Powerflash.
Few differences.
It also has a internal relay that can also have an X10 address added to it.
It can only use dry contacts for a trigger.
Only does On and Off commands. No optional things like flashing lights or triggering Powerhorns.
-
OMG $100?
_____________________
Glad that I have my very own (http://jollymorley.yolasite.com/holding-it-in.php) personal blog site (http://phyllbanks.yolasite.com/phyll.ph)
-
OMG $100?
I have a few Powerflash modules left. Contact me privately if you need one.
Jeff