X10 Community Forum

🔌General Home Automation => Automating Your House => Topic started by: dinosinc on December 03, 2012, 04:17:15 PM

Title: SS13A question
Post by: dinosinc on December 03, 2012, 04:17:15 PM

Hello All

Wondering if the dimming button on the SS13A switch can be disabled or turned off, I do not want the light being controlled to be dimmed ?

Title: Re: SS13A question
Post by: dave w on December 03, 2012, 04:57:39 PM

Quote from: dinosinc on December 03, 2012, 04:17:15 PM

Hello All

Wondering if the dimming button on the SS13A switch can be disabled or turned off, I do not want the light being controlled to be dimmed ?

Turned off, No.
Disabled, yes. Permanent method would be to pop out the clear plastic cover and tear out the conductive rubber  "BRI-DIM" accuator and replace the cover, or cover the void with white vinyl tape. Less permanent but less effective is to remove the clear cover and put a piece of white vinyl tape over the "BRI-DIM" accuator. which only discourages use, but does not diable it.

The simple answer is "No".

Title: Re: SS13A question
Post by: dinosinc on December 03, 2012, 07:37:07 PM

Dave

thanks for the response