X10 Community Forum
X10 AirPad Android Tablet => AirPad General Discussions => Problems and Troubleshooting => Topic started by: idbl_fanatic on December 11, 2012, 04:59:34 PM
-
Had this for 5 months, and now it only boots to the white screen that says airpad, and that's it.
-
I assume your only intent is to tell everyone how long you have owned your Airpad and that it just puked(?).
-
No, I was HOPING someone could help me with reinstalling the ROM or something
-
No, I was HOPING someone could help me with reinstalling the ROM or something
Did you try a factory reset? I don't have an airpad and the resats are different for different models.
-
No, I was HOPING someone could help me with reinstalling the ROM or something
Did you try a factory reset? I don't have an airpad and the resats are different for different models.
That's what I was hoping someone could help me with, I don't remember how to do it.
-
Find you model on this link.
http://kbase.x10.com/wiki/Tablets
I believe the Reset Procedure is on each individual models information page.
-
Find you model on this link.
http://kbase.x10.com/wiki/Tablets
I believe the Reset Procedure is on each individual models information page.
That is only if it will boot up, I think that I need to reinstall the ROM
-
I think you may have to do a factory reset before you can reinstall the rom.
In any case info on installing old roms can be found on my forum.
>!
-
That is only if it will boot up, I think that I need to reinstall the ROM
Maybe you bricked it. Did you ever get ICS to work on your Airpad 7?
-
Hi;
Hold the DOWN volume button and the POWER button down until it boots into recovery mode
OR
http://forums.x10.com/index.php?topic=27202.msg153766#msg153766
For my excellent Instructions.
Cheers,
BuBu
-
Hi;
Hold the DOWN volume button and the POWER button down until it boots into recovery mode
OR
http://forums.x10.com/index.php?topic=27202.msg153766#msg153766
For my excellent Instructions.
Cheers,
BuBu
Thanks!, I actually got the 002 ROM, and got that installed, everything is up and running again.