Print Page - X10 is dead, need a schematic diagram

Title: X10 is dead, need a schematic diagram
Post by: sparkey308 on December 25, 2012, 09:56:28 AM

My X10 will not power on and I suspect the power transformer. Does anyone know where I can get a schematic for the PS561 unit?

Title: Re: X10 is dead, need a schematic diagram
Post by: Dan Lawrence on December 25, 2012, 09:23:42 PM

Need more information, like what AHP version, and anything else, like other modules you use.

Title: Re: X10 is dead, need a schematic diagram
Post by: dave w on December 25, 2012, 09:42:01 PM

Quote from: sparkey308 on December 25, 2012, 09:56:28 AM
My X10 will not power on and I suspect the power transformer. Does anyone know where I can get a schematic for the PS561 unit?

There is no schematics for the X10 dialer on any of the X10 "hacker" sites.

http://www.davehouston.net/
http://www.laureanno.com/
http://www.idobartana.com/hakb/index.htm
http://www.edcheung.com/automa/ha.htm

I doubt the PS561 has ever been disected.

Title: Re: X10 is dead, need a schematic diagram
Post by: dave w on December 25, 2012, 09:47:45 PM

Quote from: Dan Lawrence on December 25, 2012, 09:23:42 PM
Need more information, like what AHP version, and anything else, like other modules you use.

Dan,
Read the original post again.

Title: Re: X10 is dead, need a schematic diagram
Post by: Brian H on December 26, 2012, 06:00:15 AM

Dan;
The PS561 is the Security Console in the DS7000 kit.
Has no connection to AHP at all and is why the post is in the Security Section of the forums.

Title: Re: X10 is dead, need a schematic diagram
Post by: sparkey308 on December 26, 2012, 09:18:26 AM

Anyone know what the output voltage should be for the power transformer?

X10 Community Forum

🛡Home Security => Problems and Troubleshooting => Topic started by: sparkey308 on December 25, 2012, 09:56:28 AM