X10 Community Forum
📸Cameras & Camera Software => AirSight Cameras => Topic started by: gcextreme on May 04, 2013, 05:11:23 PM
-
Ok so i had my camera all set up and working great, wired... at my old house... then i moved..and the camera has been packed up for about 6 months.. im trying to set it all back up... but have it on my wireless router now...and i cant seem to login to it....i cant remember my login info...
please help
-
Ok so i had my camera all set up and working great, wired... at my old house... then i moved..and the camera has been packed up for about 6 months.. im trying to set it all back up... but have it on my wireless router now...and i cant seem to login to it....i cant remember my login info...
please help
Did you try resetting to factory defaults?
Ddi you connect wired to your router and try resetting up?
See user manual how-to.
-
oki will try resetting it to defaults...what would the default login info be?
-
oki will try resetting it to defaults...what would the default login info be?
pretty sure its
admin for user name
and no password
double check and download the user manual from the x10 site support link for your camera(s)
-
http://kbase.x10.com/wiki/XX36A
-
ok i got it reset and i got the camera working wired...but i cant get it working wireless...its not seeing my wireless network wifi or whatever...
i am using a netgear N900 model wndr4500
-
ok so i fixed one problem, the coaxial port on the camera was loose, i had to take the camera apart and found that the wire going to the port was broken off...so i soldiered that back together and put it all back together and now the camera is seeing my wireless network, but when i put in all the info and connect to it, it seems to work, until i disconnect the cat5 wire from the camera
-
i followed these instructions:
http://kbase.x10.com/wiki/XX36A_Getting_Started
but after it instructs you to setup and connect to the network, when i submit it,i unhook the cable as it reboots, then i get an error:
Internet Explorer cannot display the webpage
-
i followed these instructions:
http://kbase.x10.com/wiki/XX36A_Getting_Started
but after it instructs you to setup and connect to the network, when i submit it,i unhook the cable as it reboots, then i get an error:
Internet Explorer cannot display the webpage
Go here and download the manual
http://www.x10.com/support/support_manuals.htm
or
You can go ( get it to work wired first ) to the software and click on network> wireless lan settings> scan
VERY IMPORTANT: you may have to click scan more than once ( i had to do mines at least 3-5 times ) before it sees your router. Then find your router in the box> highlilght it then
check the box Using Wireless lan> submit> Unplug Cat5 cable from router/camera
should be good to go.
-
yes I did all that but when I unplug it and it reboots it gives me the Internet Explorer cannot display page error as if its not connected to the Internet
-
yes I did all that but when I unplug it and it reboots it gives me the Internet Explorer cannot display page error as if its not connected to the Internet
Did you reboot the computer? sometimes that helps