X10 Community Forum
📸Cameras & Camera Software => AirSight Cameras => Topic started by: ecampos on June 25, 2013, 08:11:09 PM
-
I used to have one IP camera but my router was damaged and I just got replaced, however my new router is not listed on Portforward.com list and I just can not solve a way to do it on my new router, its a Huawei model HG532e, on the portforward.com is listed only HG530, HG532b, HG532b-B013 & HG532b-B022 but not my router model. PLEASE HELP!!
-
Can you supply a link to the manual?
it would help us point you in the right direction.
-
http://www.huaweidevice.com/worldwide/downloadCenter.do?method=toDownloadFile&flay=document&softid=NDY2NzM= (http://www.huaweidevice.com/worldwide/downloadCenter.do?method=toDownloadFile&flay=document&softid=NDY2NzM=)
-
That's a very vague manual.
Look for NAT settings, Virtual Server or Advanced settings.
Your best bet would be to email Huawei support. They would know exactly where to add the info and may even do it for you if you grant them access.
-
(http://C:\Users\Gloria Miranda\Documents\_Emilio\Huawei HG532e - PORT MAP screen.gif)
My MAP Port screen does not give me the options to do it...
-
Are you clicking on the advanced configuration page?
If you use the wizard setup it won't allow you to make the changes you need.
>!
-
Ok, I now know that "EchoLife-HG532" is same a "HG532e".
However screens are still not the same so I am pretty much about the same situation...
I temporary uploaded screen shoot images to one of my new customers website:
Here is my actual screen:
(http://www.enfiestartemexicali.com/tempo/Huawei_HG532e-PORT_MAP_actual_screen.png)
This is what the Manuals shows as screen should be:
(http://www.enfiestartemexicali.com/tempo/HG532e_Should_be_screen.gif)
Please advise!
-
I think you need to click the new tab that may allow you to enter the internal host info.
Also look at the port activation screen and see if that will allow anything.
I know very little Spanish so I'm more in the dark then you.