X10 Community Forum

🛡Home Security => Problems and Troubleshooting => Topic started by: johnwow on July 25, 2013, 06:42:53 PM

Title: sc1200 display
Post by: johnwow on July 25, 2013, 06:42:53 PM
my sc1200 shows low battery on the display and I do not have any sensors in the 25 range. cant bypass it and cant clear it ...help...
Title: Re: sc1200 display
Post by: Brian H on July 25, 2013, 08:00:48 PM
The LCD display is showing a Low Battery Message for a Zone you are not using?
Title: Re: sc1200 display
Post by: dave w on July 25, 2013, 08:19:12 PM
my sc1200 shows low battery on the display and I do not have any sensors in the 25 range. cant bypass it and cant clear it ...help...

I don't have one, but gee, could it be for the batteries in the console?
Title: Re: sc1200 display
Post by: Brian H on July 27, 2013, 06:14:05 AM
I am not sure you get a message on the LCD Display. Mine is broken and I can't look.
It does have a Green Battery LED next to the LCD Display that lights when the batteries are not installed or almost dead.
Title: Re: sc1200 display
Post by: dave w on July 27, 2013, 10:06:34 AM
I am not sure you get a message on the LCD Display. Mine is broken and I can't look.
It does have a Green Battery LED next to the LCD Display that lights when the batteries are not installed or almost dead.

Well if X10 uses the LED for console battery status, then I doubt they also put the information on the display. Sorry johnwow. I'll go back to sleep now.