X10 Community Forum

🖥️ActiveHome Pro => Plug-ins => Smart Macros => Topic started by: Tony Olson on January 08, 2015, 08:04:03 AM

Title: ActiveEye Motion Sensors controlling multiple lights
Post by: Tony Olson on January 08, 2015, 08:04:03 AM
In the past I had Motion Sensors outside that were tied to one device/light. What I had set up was turning on additional (outside) lights when these were turned on.

I no longer have the macro (s) to do this. If someone could point me to an example I'd be most appreciative.

Thanks in advance.

Tony
Title: Re: ActiveEye Motion Sensors controlling multiple lights
Post by: lviper on January 08, 2015, 08:46:06 AM
THe real simple way is to use your motion sensor as the trigger to turn on the lights you want. For example.

Motion Sensor is A1
Lights are B1, B2 and B3

Using A1 On as the trigger you set the macro to turn on B1, B2 and B3

THen you can create another macro using A1 Off as the trigger to turn off B1, B2 and B3.
Title: Re: ActiveEye Motion Sensors controlling multiple lights
Post by: Tony Olson on January 08, 2015, 11:03:10 AM
Thanks Iviper. I'll do just that. #:)