X10 Community Forum

📸Cameras & Camera Software => AirSight Cameras => Topic started by: tomh on January 29, 2017, 09:29:57 PM

Title: Airsight XC36A camera setup
Post by: tomh on January 29, 2017, 09:29:57 PM
So, I've had this camera for a few years and I want to make it work again.  I had it running on another computer, cut can't seem to find the program to make it run anymore.  I can't find the original disk that came with it.  I already have the IP address which was from the IP Camera Tool.  It was on an old computer with Vista and 32 bit.  I would like to get it up and running on a Win 7 or 10 machine 64 bit.  What can I do next?

Thanks  :(
Title: Re: Airsight XC36A camera setup
Post by: Tuicemen on January 30, 2017, 02:42:19 AM
if you have the IP from the camera tool used on that pc then you just go to the browser and log in using the IP and port.
if you've lost the camera tool try this one http://www.authinx.com/x10/Cameras/software/IPTool.rar
I have a copy of the windows software some where I see if I can find it.
here are some links not sure what will work