X10 Community Forum
📱X10 WIFI => 🐞X10 WIFI App problems or bugs => 🏥Help & Trouble shooting => Topic started by: lgb0250 on December 02, 2018, 12:19:16 PM
-
Did a search and found some others that have had this same setup problem but it looks like this forum gave them the info they needed to finally get it working properly.
Received my new unit yesterday and was excited since I really wanted to start controlling my Christmas lights with it immediately.
Fresh out of the box I tried to connect to my 2.4ghz channel with no success. Can’t even count how many times I’ve tried it over the last 24 hrs and still no luck.
I’m using the correct network and password. I even clicked the little box that says show password just to make sure I had it entered correctly. I went to my iPhone and iPad settings and forgot the network and re entered the password and was connected immediately to those devices. Still no luck with the WM100. I have done many resets to no avail. I have done a hard reset on the WM100 itself to no avail. I have even deleted and reinstalled the X10 app. Still nothing. I have unplugged it and let it set overnight and still nothing. Have tried connecting when right next to the router so it’s not a distance thing.
I’m not a tech guru but I don’t have any other problems connecting anything to my router so I doubt it is the problem. I have a Netgear Nighthawk R6350 router and am using WPA2-PSK security.
I’ve read everything I can about the setup process and I believe I have a device that is DOA. Can anyone think of another explanation? Thanks
-
most newer phones auto connect to 5ghz networks be sure your phone is on the 2ghz network the app attempts to use your phones connection during setup.
-
I understand that, thanks. I had even went into my WiFi settings and forgot my 5ghz band so it wouldn’t auto reconnect. Didn’t help. Forgot to include that in original post.
-
Send support an e-mail stating everything you tried and request a RM ticket
-
Thanks. I had already sent them an email telling them I wanted an RMA but now that I’ve calmed down, I really want to keep this, if I can ever get it working! I will send them everything and see what happens. Again, thanks for your help.
-
If you know someone with an Android device you can attempt to connect and setup with it each OS has their own app and sometime others have been able to setup using the other OS device.
-
Not suggesting that this is the problem, but when I was fighting with the unit to get it connected, I accidentally used my router "admin" password, not my SSID password. I was absolutely convinced that it was the correct password. It was...just not for what i was doing!
B:(
-
And I thought I was the only one that did that! rofl
-
.....when I was fighting with the unit to get it connected, I accidentally used my router "admin" password, not my SSID password. …..
My most common error when logging onto things like this. Is when they ask for an email address as a user name.... I tend to forget to add the ".com" at the end.
-
If you know someone with an Android device you can attempt to connect and setup with it each OS has their own app and sometime others have been able to setup using the other OS device.
Agreed. I have better luck in general with android. I am able to access all features, including the log, with an iPhone 5 running 10.3. My iPad, running iOS 12, is my biggest headache.
-
... I really want to keep this, if I can ever get it working! ...
Are you sure? You know that it doesn't have a battery-backed clock (so it will lose the time if there is a power interruption, and much be manually re-synced from a device *in the same time zone*), right?
And the server goes down every so often, leaving you with no access to the unit.
The company can't get the developer/manufacturer to fix the bugs, and the unit doesn't even meet it's original design criteria.
I would think long and hard before deciding you still want to sink your money into this unit.
-
Thanks. I had already sent them an email telling them I wanted an RMA but now that I’ve calmed down, I really want to keep this, if I can ever get it working! I will send them everything and see what happens. Again, thanks for your help.
Take the refund and run... over to the thread about the Pi X10 Hub. With a Raspberry Pi Zero W (under $25 for all you'll need) you'll have everything and more than the WM100 can & will ever do and you'll put $75 back in your wallet. Also, Dave Houston is taking a different tack and developing his 'WM101' as another good option to the failed WM100 from X10. You can read more in that thread too.
-
Based on how I was handled today and previous comments, I am choosing to run.
Finally got an email back from them at 11am this morning telling me sorry and it looked like I had done everything they would have done. Their only question was if the blue light stayed solid blue or blinked when it was just sitting there. I responded that when the unit is plugged in and just sitting there it is a solid blue. Doesn’t blink unless I press and hold the sync button.
That’s the last I’ve heard from them! Very poor customer service. I can still use the wired controller I’ve been using for years. Was just hoping to be able to set up timers and take advantage of the dusk/dawn feature.
Thanks for all the feedback
-
Thanks. I had already sent them an email telling them I wanted an RMA but now that I’ve calmed down, I really want to keep this, if I can ever get it working! I will send them everything and see what happens. Again, thanks for your help.
Take the refund and run... over to the thread about the Pi X10 Hub. With a Raspberry Pi Zero W (under $25 for all you'll need) you'll have everything and more than the WM100 can & will ever do and you'll put $75 back in your wallet. Also, Dave Houston is taking a different tack and developing his 'WM101' as another good option to the failed WM100 from X10. You can read more in that thread too.
Would love to pursue that but after reading some posts in that thread I understand when I am out of my element! Way out of my league!! Shoot, I actually thought a Raspberry Pi was a pie with Raspberries in it. Go figure.
-
Thanks. I had already sent them an email telling them I wanted an RMA but now that I’ve calmed down, I really want to keep this, if I can ever get it working! I will send them everything and see what happens. Again, thanks for your help.
Take the refund and run... over to the thread about the Pi X10 Hub. With a Raspberry Pi Zero W (under $25 for all you'll need) you'll have everything and more than the WM100 can & will ever do and you'll put $75 back in your wallet. Also, Dave Houston is taking a different tack and developing his 'WM101' as another good option to the failed WM100 from X10. You can read more in that thread too.
Would love to pursue that but after reading some posts in that thread I understand when I am out of my element! Way out of my league!! Shoot, I actually thought a Raspberry Pi was a pie with Raspberries in it. Go figure.
that thread was the early developement of using a Pi and Cm15. I have put together a SD card image that does all the heavy lifting although still in the testing stages using users simular in their understanding of a raspberry pi as you. I'm sure you'd have no difficulties getting up and running if your interested.
-
Based on how I was handled today and previous comments, I am choosing to run.
Was just hoping to be able to set up timers and take advantage of the dusk/dawn feature.
I think you made the right choice to return the WM100. It won't do what you want (not very well, and not for very long - if you *ever* have any power interruptions), so getting a refund while you still can is probably the best option for you.
I wish that Authinx would come to their senses about this product, and either find a way to get the manufacturer/developer to fix all the problems (and make the product work the way it was advertised), or cut their losses and start again (with in-house development).
-
Thanks. I had already sent them an email telling them I wanted an RMA but now that I’ve calmed down, I really want to keep this, if I can ever get it working! I will send them everything and see what happens. Again, thanks for your help.
Take the refund and run... over to the thread about the Pi X10 Hub. With a Raspberry Pi Zero W (under $25 for all you'll need) you'll have everything and more than the WM100 can & will ever do and you'll put $75 back in your wallet. Also, Dave Houston is taking a different tack and developing his 'WM101' as another good option to the failed WM100 from X10. You can read more in that thread too.
Would love to pursue that but after reading some posts in that thread I understand when I am out of my element! Way out of my league!! Shoot, I actually thought a Raspberry Pi was a pie with Raspberries in it. Go figure.
Noam- Setting up the Raspberry Pi image that Tuiceman is preparing shouldn't be difficult as he designed it to be done by people with no experience at all. He's created a step-by-step guide that requires no previous knowledge. Given the minimal investment required (under $25 for everything) you might want to give it a try.
-
Where's the guide and the thread? I looked a bit and can't find it. Thanks.
-
Currently the image download, install guide and related threads are only accessable to Beta testers. If anyone is interested in going the Pi X10Hub route PM me and I'll set you up as a tester.
-
[/quote] that thread was the early developement of using a Pi and Cm15. I have put together a SD card image that does all the heavy lifting although still in the testing stages using users simular in their understanding of a raspberry pi as you. I'm sure you'd have no difficulties getting up and running if your interested.
[/quote]
That’s a very kind offer. I have pm’d you. Thanks
-
That’s a very kind offer. I have pm’d you. Thanks
:)% >!