X10 Community Forum

💬General Category => General Discussion => Topic started by: Knightrider on March 18, 2019, 08:42:49 PM

Title: ACT A10 TK184W
Post by: Knightrider on March 18, 2019, 08:42:49 PM

Anyone have a manual for one? It's an 8 button transmitter very similar to a keypadlinc.

Title: Re: ACT A10 TK184W
Post by: Knightrider on March 19, 2019, 10:37:05 PM

Found it on the way back machine.

Title: Re: ACT A10 TK184W
Post by: Brian H on March 20, 2019, 06:10:49 AM

I didn't have that one in my archived ACT manuals. Glad you where able to find it.

Title: Re: ACT A10 TK184W
Post by: jimfrazier on April 29, 2019, 01:19:37 PM

I just purchased an ACT TK184W and would like to set the house code on this. Does anyone have instructions or a manual? Thanks!

Title: Re: ACT A10 TK184W
Post by: brobin on April 30, 2019, 11:17:15 AM

TK184 manual attached.

Title: Re: ACT A10 TK184W
Post by: jimfrazier on August 08, 2019, 10:33:14 AM

Thanks for posting the ACT TK184W manual. I'm using this device to indicate the status of my PR511 motion detector floodlights and for manual control. Nice addition to my home.
I was wondering if anyone knows where I could purchase these NOS or used.

Thanks.

Title: Re: ACT A10 TK184W
Post by: bkenobi on August 08, 2019, 10:58:49 AM

I use the XPT wall transmitter paired with the 4-button control panel (XPT4).  The version I have is actually Insteon from memory so it has an LED to indicate if the light is on/off.  It works quite well.  That said, from reviewing the manual, the TK184W appears much more flexible with its configuration.  The XPT can be changed from 4 button control to 3 button with dimmer by changing the face plate.  The ACT unit appears to be able to switch by programming.  If there is an LED behind each button, that would be a really sweet unit!

That said, I have no idea where to get one other than recommending watching ebay.