X10 Community Forum

X10 Zone => Article Discussion => Topic started by: scottmc on February 21, 2022, 03:09:39 PM

Title: X.10 Output Unit?
Post by: scottmc on February 21, 2022, 03:09:39 PM

I see the PSC01 interface that will accept a dry contact or low voltage input and convert to X.10 signal, but is there anything that does the reverse (as dry contacts or low voltage, rather than 110 vac)?  Thanks.

Title: Re: X.10 Output Unit?
Post by: Brian H on February 21, 2022, 03:37:28 PM

The X10 UM506 and X10Pro PUM01.
Can take an X10 power line command and has a low voltage dry contact output and a sounder.
It can be set to a sounder only, both or dry contact only output.
Continuous On and Off or an On can trigger about a three second output and it then times out.
Manuals are available on the sales pages.
https://www.x10.com/collections/x10-pro-appliance-modules/products/pum01
https://www.x10.com/products/um506?_pos=1&_sid=1ac5af326&_ss=r

Title: Re: X.10 Output Unit?
Post by: scottmc on February 27, 2022, 02:25:53 PM

Brian H.,
Thank you.  That's awesome!  I appreciate the help.