X10 Community Forum
🖥️ActiveHome Pro => ActiveHome Pro General => Topic started by: robwolfe on January 24, 2023, 01:27:12 PM
-
After many years of use my WS4777, 3-way wall switch has a problem. Suddenly the slave would not turn on the lights. So I replaced both units. No change. The slave will turn off the lights. The master will turn the lights on and off. Remote control of the lights is fine.
I created a test setup with the removed units and everything was correct.
The power accesses the setup via the slave and the master connects to the two lights in the hall.
I would most appreciate any ideas to solve this problem.
Robert
-
Did you change the lights themselves? Try the same bulbs that worked in the test setup, maybe?
-
Thanks for the idea. I have been fighting this problem for months so I could not identify which bulbs were used in the test setup. However all the bulbs were 60 watt incandescent.
Robert
-
Years ago I remember having problems that were fixed by replacing old bulbs that were on their last leg. Worth a shot.
-
Thank you for the suggestion. Unfortunately nothing changed.
Robert