X10 Community Forum

📸Cameras & Camera Software => Camera General Discussion => Topic started by: tony gerada on October 25, 2005, 11:58:30 PM

Title: X10 Cameras
Post by: tony gerada on October 25, 2005, 11:58:30 PM

 
Hi,
I live down under, can the X10 cameras be
switched to transmit PAL instead of NTSC.
Thanks
Tony

Title: Re: X10 Cameras
Post by: SamEyeHam on October 29, 2005, 01:06:28 AM

They transmit STATIC format images. This
will be compatible with any TV with all the
circuitry ripped out of it.  The resolution
is really 10 pixels by 12 pixels.  This is
high resolution for the STATIC standard.
And the night watch cameras are just that,
you can watch the dark night with a black
image on your screen.

Title: Re: X10 Cameras
Post by: SnotGeezer on November 07, 2005, 01:37:13 PM

ditto sam

Title: Re: X10 Cameras
Post by: anonymous on November 19, 2005, 06:55:50 PM

Thanks, SamEyeHam,  SnotGeezer.
Tony

Title: Re: X10 Cameras
Post by: Brian H on November 20, 2005, 12:00:15 PM

They are NTSC and if you don't have  120
volt power the supplies will also not
connect to the mains.

Title: Re: X10 Cameras
Post by: skootch on December 03, 2005, 11:40:31 PM

is STATIC an ISO standard signal?

Title: Re: X10 Cameras
Post by: Brian H on December 04, 2005, 06:18:32 AM

Static to me is the noise a receiver makes
when NO signals are there just the back
ground noise.

Title: Re: X10 Cameras
Post by: skootch on December 07, 2005, 04:29:50 PM

not static, you dolt!  STATIC is the iso
5872.9a standard for electronic crap that
doesn't work at all.