X10 Community Forum

🛡Home Security => Home Security General => Topic started by: mark on August 12, 2004, 03:50:37 PM

Title: x-10 smoke or fire alarm
Post by: mark on August 12, 2004, 03:50:37 PM

Has anyone found an x-10 compatible smoke
detector that triggers an all lights on
signal?

Title: Re: x-10 smoke or fire alarm
Post by: B Taylor on August 12, 2004, 06:13:39 PM

I have been in contact with BRK electronics
(First Alert) re: a smoke alarm with a
Normally Closed contact to that can be
connected to an X10 Door/Window Sensor.  BRK
sells smoke alarms in the UK that can be
interconnected using an alarm wire.  They
are currently checking to see if that
connection will trigger a door/window
sensor.  If this works, the all lights on
signal will be transmitted through the X10
alarm panel.  I anticipate a response by
8/13/04 and will advise.  

Title: Re: x-10 smoke or fire alarm
Post by: scott graham on August 21, 2004, 04:34:10 AM

Go to http://www.save-on-
security.com/deaf.htm for an interface set
up and helpful diagram.

Title: Re: x-10 smoke or fire alarm
Post by: robert w curtin on January 02, 2005, 03:39:51 PM

I hooked up a smoke alarm to a door window
sensor seems to work fine

Title: Re: x-10 smoke or fire alarm
Post by: hernan on January 10, 2005, 08:38:10 PM

Could you give us the manufacturer, model
no. and where this smoke alarm can be
purchased from?

Thanks.

Title: Re: x-10 smoke or fire alarm
Post by: dentalchef on April 12, 2007, 01:06:09 AM

new here- hi to all!  just trying to add smoke/fire protection to my X 10 sys.- isnt it possible to add a piezo, or similar sensor (like a glass break sensor) next to my smoke detector and when the smoke alarm goes off (hope it never does) it will trigger the X 10???  just thinking out loud...will continue to read through the forum to see what others have done.  thanks!  George