X10 Community Forum

🛡Home Security => Home Security General => Topic started by: customer on August 07, 2005, 10:23:20 PM

Title: Socket Rocket Useless Item in 19 pieace alarm system?????
Post by: customer on August 07, 2005, 10:23:20 PM

I got the 19 Pieace Alarm system and within
those 19 pieaces I got 2 socket rockets
Screw-in Lamp Modules.  Except to configure
their House and Unit codes it appears I need
another device that does not come included
within the 19 pieace system.  So what the point?
I mean how do I go about useing those socket
rockets with the 19 pieaces that come with
the order ensamble?

Thanks

Title: Re: Socket Rocket Useless Item in 19 pieace alarm system?????
Post by: andrew on August 12, 2005, 02:34:59 PM

not sure which package you bought but if you
set the lights to the same house/unit code of
the security console, they will flash on and
off when there is an alarm or arming the
system...

Title: Re: Socket Rocket Useless Item in 19 pieace alarm system?????
Post by: Brian H on August 12, 2005, 04:10:23 PM

The Security /Home Remote Control Model
SH624 in the kit. The four buttons labeled 1
to 4 will control the socket rocket and the
two below them with the up and down arrow
will dim and brighten the last lamp module
address sent out. If you have not
reprogramed the Socket Rocket and the House
Code Dial is on A. The #1 button set should
control it. If you want to reprogram the
socket rocket to a different house and unit
code [1-4 on this remote]. Power down the
module when you apply the power send the on
signal 3 times in 30 seconds from one of the
four unit code buttons on the remote. The
security console also has to have the same
House Code Set on its dial to match the
remote. Note my remotes 1-4 buttons also
will transmit through my tranceiver [RR501]
if the hosue codes match.