X10 Community Forum

🛡Home Security => Home Security General => Topic started by: arthur spanton on September 10, 2005, 08:16:56 AM

Title: door/window sensors
Post by: arthur spanton on September 10, 2005, 08:16:56 AM

We have Miaml awning windows that open out with
the screen on the inside. How do I use the
door/window sensors with the screen on the
inside?
Thanks

Title: Re: door/window sensors
Post by: danny on September 11, 2005, 03:08:12 PM

Our doors are recessed from the frames. How
do I install the door/window sensors.The
two magnetic contacts won't be flush with
each other.

Title: Re: door/window sensors
Post by: fred schulz on September 11, 2005, 11:29:31 PM

I have a few sensors that are not flush. in
fact one set is at a 90 degree angle of
each other. Expirement with out permanatly
mounting the sensors.  Have the wife hold
the transiever part of the sensor and you
hold the two sensors apart from one another
with the arrows pointing at one another and
then seperate them.  If the light blinks
when pulling the sensors apart you will be
ok.