X10 Community Forum

🔌General Home Automation => Automating Your House => Topic started by: richard on November 12, 2005, 11:35:10 AM

Title: Using the SS13A Remote
Post by: richard on November 12, 2005, 11:35:10 AM

I am trying to turn on and off a macro with
a SS13A switch but the SS13A transmits the
same code like A10 On and A10 Off.

So my question is how do you setup a macro
to do on and off with the same code.

I can't have two macros with the same
address so how do you turn lights on and
off using one rocker on the SS13A

Title: Re: Using the SS13A Remote
Post by: Brian H on November 12, 2005, 01:26:32 PM

The on and off code are not the same. One is
A10 AON the other is A10 AOFF. Make two
macros. One triggers on A10 ON the other on
A10 OFF.

Title: Re: Using the SS13A Remote
Post by: hht on November 26, 2005, 04:05:28 PM

I've lost the setup instructions for my
SS13A and need to make changes. would
appreciate a copy.
Thanks

Title: Re: Using the SS13A Remote
Post by: Bill Z. on November 26, 2005, 05:24:04 PM

ftp://ftp.x10.com/pub/manuals/

Title: Re: Using the SS13A Remote
Post by: hht on November 26, 2005, 08:47:53 PM

Bill Z
Thanks for the manual information