X10 Community Forum
🔌General Home Automation => Automating Your House => Topic started by: tomb on November 17, 2005, 12:59:15 PM
-
I've got a light that is set to L6. It
turns on and off via L6 as it's supposed to.
Problem is, it also comes on if I turn on L8.
Turning off L8 does not turn off the L6 light.
Moving the misbehaving light to *any* other
unit code works fine. It's only on L6 that
it decides to turn on with L8.
Any idea what this might be? (L6 is a ws4777
3 way and L8 is a ws467.
Thanks,
Thomas
-
Good Evening,
You have a bad unit. The alignment is off or one or more of the component tolerances has drifted. To prove this plug in a different unit. There are other possibilities but this is the most probable.
Good Luck
Gil Shultz