X10 Community Forum

🔌General Home Automation => Automating Your House => Topic started by: capple on January 20, 2006, 04:48:40 PM

Title: EagleEye dusk/dawn is Unit code +1 Can that be changed?
Post by: capple on January 20, 2006, 04:48:40 PM

The instuctions states " The default House
and Unit Code transmirred when dusk/dawn is
sensed is Unit Code + 1 (i.e. A 2) on at
dusk, A2 off at dawn."
I read that and it tells me I can chang it
to Unit Code + (1-16).

Title: Re: EagleEye dusk/dawn is Unit code +1 Can that be changed?
Post by: Brian H on January 20, 2006, 07:22:47 PM

Yes you can change both the House Code A-P
and the Unit Code 1-16. By button sequences.
The Dusk/Dawn is always the motion sensors
address +1; like Motion B1; Dusk/Dawn
B1+1=B2. Now if you say; OK I will use like
B16 for my motion there is no B17 so I get
no Dusk/Dawn. Nice try. I believe it loops
back to B1. One of the sensors if memory
serves me; MS15A Indoor and MS16A
Indoor/Outdoor Active Eye can be set to only
send if it is dark or all the time and if
you want the Dusk/Dawn signal on unit+1 to
be disabled.