X10 Community Forum

🖥️ActiveHome Pro => ActiveHome Pro General => Help & Troubleshooting => Topic started by: Stephan on February 27, 2006, 07:07:30 PM

Title: Not all timers working
Post by: Stephan on February 27, 2006, 07:07:30 PM

Since I upgraded to 3.201, my Monday morning timers have stoped working. What is going on this time. I tried reloading the interface last week, same problem this morning. I would like an answer.

Stephan

Title: Re: Not all timers working
Post by: X10 Pro on February 27, 2006, 07:15:28 PM

What's kind of module is the timer for? Is the timer set for a specific time, or does it use dusk/dawn? Can you control that module from the ActiveHome screen?

Title: Re: Not all timers working
Post by: Stephan on February 28, 2006, 11:10:25 PM

The timers are for weekdays only. They worked today. The modules are a lamp module and an appliance module. I also have in the timer repeat checked. The lamp on time is 6:00am & off at 7:25am. The appliance module controls a stereo and is set to come on at 6:01am and off at 7:20am. When the timers do not work, neather the on or off times work. I checked the interface time and date - they where correct. This is not the first time timers did not work after an update.

Stephan

Title: Re: Not all timers working
Post by: Mystyx on March 01, 2006, 01:41:18 AM

Try Clearing Interface, Download Interface the unplug the cable from the CM15A to the PC USB and see if it fixes it since the patch?