X10 Community Forum
🖥️ActiveHome Pro => ActiveHome Pro General => Software Problems & Bugs => Topic started by: JERRY VARN on April 13, 2006, 04:01:35 PM
-
IF YOU ADD A 15 MINUTE BEFORE TO THE DUSK TIME IT FAILS TO ACT ON IT , IT CONTINUES TO START AT ITS NORMAL TIME . ANY ONE SEEN THIS ONE. ????
I'M HAVE V-3.203 INSTALLED
-
I have timers on 15min & others 30min ect before dusk... you need a command before delays in a macro to delay from something?
-
I UNDERSTAND ABOUT DELAYS WITHIN THE BODY OF A MACRO. THATS
NOT THE PROBLEM.
IF YOU CLICK ON DUSK OR DAWN FOR THE START TIME OF A MACRO , IT HAS A DUSK DELAY TIME BOX WITH A BEFORE OR AFTER , THATS WHAT I
CAN'T MAKE WORK. I HOPE THAT MAKES IT A LITTLE CLEARER , THANK FOR YOUR REPLY AM AWAITING ANY ANSWERS YOU MIGHT HAVE TO THIS PROBLEM.
-
I have never had a problem with the dusk delay. Then again all of my dusk timers are on modules, not macros. If you do a dusk/dawn delay on a module timer does it work properly?
-
IF YOU CLICK ON DUSK OR DAWN FOR THE START TIME OF A MACRO , IT HAS A DUSK DELAY TIME BOX WITH A BEFORE OR AFTER , THATS WHAT I
CAN'T MAKE WORK. I HOPE THAT MAKES IT A LITTLE CLEARER
This is what I mean... I have 3 lights, one set to 30min before Dusk, one at 35min and one at 40min and they turn off at 1:30am if I don't turn them off.
Under Dusk Delay
ON | 30min | *Before || 50% dim || & all days are selected
Do you try this using store in interface or PC mode?
I don't use on | at night though |
There could be a problem then with dusk on macros? or its settings? but the timer designer works?