X10 Community Forum

🖥️ActiveHome Pro => ActiveHome Pro General => Help & Troubleshooting => Topic started by: Michael512 on April 15, 2006, 02:47:54 PM

Title: AHP can control module but remote cannot
Post by: Michael512 on April 15, 2006, 02:47:54 PM

Very strange problem here.  Been using AHP and maybe a dozen modules for a year.  2 different remotes + AHP can all control all modules EXCEPT the latest wall switch I installed today.

The wall switch can ONLY be controlled by AHP, not by the remotes.  Looking at the activity log, I can see it receive the RF signal to control each module from the remote, including the new wall switch that doesn't respond.  Log also shows AHP controlling the switch, which works.

Entire house is on house code A; A is set specifically in AHP.  All modules are A1 thru A16; some are macros (A1, A2) and some are direct.  New wall switch is A4 (and there's no conflict with other devices).

Baffling to me....anyone have any ideas?

Title: Re: AHP can control module but remote cannot
Post by: Michael512 on April 15, 2006, 03:01:20 PM

Never mind!  I downloaded the March update (1.42 I think?) and that seemed to fix it.

Title: Re: AHP can control module but remote cannot
Post by: Dan Lawrence on April 15, 2006, 10:57:38 PM

1.42 is an Active Home update and does not apply to AHP. The last update available for Active Home Pro is 3.203 dated 3/23/06. It is still available.