X10 Community Forum

🖥️ActiveHome Pro => ActiveHome Pro General => Help & Troubleshooting => Topic started by: wireddecker on May 26, 2006, 07:52:57 PM

Title: Issues with Remote and Active Home
Post by: wireddecker on May 26, 2006, 07:52:57 PM

Not sure what's going on.  Remote was working.  Turned off and on lights fine and saw it flipping them off and on in active home...works fine.  now I've tried two different remotes on multiple x10 modules.  remotes do not control lights anymore.  I do however see them sending the signals...as i see things switching off and on in active home...but it does not relay out toi the lights....the only point of failure I can think of is the active home pro transmitter?  any idea?

Title: Re: Issues with Remote and Active Home
Post by: Brian H on May 27, 2006, 07:01:10 AM

Double check in AHP. That the tranceived house code for the remote is set to tranceived. Sometimes it gets set off or Auto fails to enable a house code in use.

Title: Re: Issues with Remote and Active Home
Post by: Tuicemen on May 28, 2006, 06:26:22 PM

As Brian stated sometimes the settings get changed this happens usually at a update so if you've done one before everything stopped thats what caused it! ;)
Also as mentioned the auto sometimes fails usually this is not for an old address but a new module just added. If your having problems with the auto use  specific. ;)