X10 Community Forum
📸Cameras & Camera Software => Camera General Discussion => Topic started by: rizrash on May 29, 2006, 06:54:57 AM
-
will any one in this world tell me how XC10 cams will work using comptuter system? at my end only camera is giving its output not all 3 any idea tried every thing
-
You may find some install instructions in the Support area of X10.com. I have seen them there.
Wireless or wired cameras?
Do you have any software and an interface to send the signals to the cameras to switch if wireless?
Only one wireless camera can be on at one time as they interfere with each other if more than one is on at a time. They work in groups of 4 1-4;5-8;9-12 and 13-16. All on one house code. The wireless cameras have an addressable power supply with address dials. If you turn on; lets say B2; cameras on B1, B3 and B4 automattically turn off.
-
when i bought these cameras the support guys said that 3 will work and now i have to buy another one why support guys don't tell the exact things
-
rizrash: 3 will work you miss under stood Brian H in your case you want the cams 1,2,3 or 2,3,4 keeping them inside the group of 4. This means turning on one will turn off the others in the group! (usualy) ;)