X10 Community Forum

📝Reviews => Old X10 web sites => X10 Web Site Reviews => NewtoX10.com => Topic started by: x10marko on June 14, 2006, 08:30:15 PM

Title: www.NewToX10.com
Post by: x10marko on June 14, 2006, 08:30:15 PM
Hello everyone!

Here I am again; today I'd like to ask you to take a look at my latest project: www.NewToX10.com

Every piece of input is appreciated! You can post right here or shoot me an email: markow@x10.com



Make sure you check out my tips page: www.NewToX10.com/markos_tips.html
I hope some of you will help me fill that page with tips and hints around X10 products.

Thank you all!

Title: Re: www.NewToX10.com
Post by: steven r on June 14, 2006, 11:59:13 PM
Again great work.

Don't forget that if a newbie buys your Motion Sensor Lighting Package they'll need something to use to program the socket rocket. You don't want someone complaining because they couldn't program it. You might offer a package with some kind of controller box with it. Well I suppose if everything defaults to A1 it wouldn't be too bad by itself.
Title: Re: www.NewToX10.com
Post by: x10marko on June 15, 2006, 03:25:12 PM
Thanks guys! I appreciate your input.

Very valuable info, thanks! We should probably make the solution to this issue more obvious. I will incorporate it into my tips.

The solution is quite simple:

1. Program motion sensor to desired code first
2. Program transceiver to same code
3. Screw in Socket Rocket
4. Push the House/On button on the motion sensor 3 times.

This will set the "listening" socket rocket to the desired code. The same procedure applies if you want to change the code, simply unscrew the socket rocket and repeat steps 1-4.

Thanks again, and please keep checking and giving me input on how to improve the site. We just started it, so there is a lot more to come.