X10 Community Forum
🖥️ActiveHome Pro => ActiveHome Pro General => Topic started by: Mike-X10 on August 13, 2006, 03:22:00 PM
-
My new ActiveHome Pro controls the standard, simple Levitron wall switches fine. But it refuses to control 3-way or "decorator" style switches at all. Any ideas? I tried all the "obvious" stuff...
-
What model 3-way switches. X10 X10Pro Leviton or another brand?
Do you have any other X10 controllers or remotes that you can try to see if they control them. There is a chance all the 3-ways are on the other phase of the home and the X10 signals have a probelm getting to them. Also any computers or electronic gadgets maybe in the same room or on the same circuits as the 3-way switches. If so you may want to selectively unplug things to see if the problem changes. If so you have a signal sucker or a noise generator. Than a X10 filter on the offending device maybe needed.
-
I can control everything with an MT10A unit, but not the 3-ways or decorators with the PowerHouse software...weird...
-
Try plugging MT10A into same outlet as the CM15A AHP controller and see if MT10A can control the wall switches in question. If still no control, Brian H probably nailed it as a phase problem. Do a search for "phase" and you should find answers.