X10 Community Forum
🛡Home Security => Problems and Troubleshooting => Topic started by: lynnymoore on September 06, 2006, 09:52:45 AM
-
The SH624 worked fine the first day!
The next day it started lighting two different lights when I turned on a lamp module instead of the one I pushed.
I turn a lamp off and another one turns on then off a few seconds later or sometimes stays on altogether.
While one of my lights will not turn on at all now...no matter what I do.
It's not like a have a lot of them. This is three lamp modules I am talking about. I even took all the windows and doors offline thinking they were complicating matters. Nada.
I assumed a lot about this system it seems. Is anyone out there successfully using the x10 system in their home for security and automation? If so, what's the secret?
I am starting to get upset since I just spent a bundle of money on this.
-
The SH624 worked fine the first day!
...I am starting to get upset since I just spent a bundle of money on this.
...I assumed a lot about this system it seems.
Is anyone out there successfully using the x10 system in their home for security and automation?
If so, what's the secret?
I am! For almost 30 years... ;D
Set aside a good-sized block of time (ranging from several hours to several days), and start reading here: TTA's X10 Troubleshooting Tips Thread (Read 288 times) (http://www.x10community.com/forums/index.php?topic=9899.0)
Follow *ALL* the LINKs and read them too!
When you've mapped out your circuits and gone through the Troubleshooting Flowchart, come back and we'll see where you're at. ;)
-
Thanks for the great links and advice Old Timer! I will...when I have time. ::)