- November 23, 2024, 04:39:03 AM
- Welcome, Guest
|
1
on: November 20, 2024, 10:53:09 PM
|
||
| Started by rlesperance - Last post by gadgetboy | ||
|
I have been running a Raspberry Pi 3b+ with a CM15 using HomeGenie for several years with great sucess for several year with the help and guidance of this group. Considering I am a 67 year old retired deisel mechanic with MS and I have had a stroke, take the advice available here to heart.
|
||
|
2
on: November 19, 2024, 01:39:22 PM
|
||
| Started by rlesperance - Last post by brobin | ||
|
Have a look at this thread: https://forums.x10.com/index.php?topic=4339.0
There doesn't seem to be a lot of activity on the MAC front. You might consider buying an old windows laptop just for the CM15A. Even though I use Windows, I have an old WIN 7 32 bit laptop connected to my Stargate. OR, you might want to look at running HomeGenie on a Raspberry Pi connected to the CM15A. |
||
|
3
on: November 19, 2024, 10:43:45 AM
|
||
| Started by rlesperance - Last post by rlesperance | ||
|
I have tried on Indigo forum from Perceptive Automation without any reply.
Is there somebody out there that has experience with the CM15A, Mac OS and the Indigo software ? |
||
|
4
on: November 07, 2024, 07:27:20 PM
|
||
| Started by trkeenan - Last post by brobin | ||
|
I'm running v1.22 with the 2.18c application. I'm not aware of any newer versions or what 1.22 added as I've never really done much with it.
|
||
|
5
on: November 06, 2024, 02:54:37 PM
|
||
| Started by trkeenan - Last post by GarageHawk | ||
|
Got it. Thank you very much. I wasn't aware there was a firmware version beyond v1.19. Are you currently running v1.22? Do you happen to know what the 1.22 version did?
Is there a HomeRunner RBI app version newer than v2.18c May 14,2016? Best regards, Bill |
||
|
6
on: November 04, 2024, 02:35:25 PM
|
||
| Started by trkeenan - Last post by brobin | ||
|
I have uploaded HRRBI v1.22 from July 2017 to FileMail where it can be downloaded until 11/11/24. After that I can do it again as needed or email to anyone requesting it. I have some older versions too.
Here's the download link: https://www.filemail.com/d/ixomytlucllfmrh |
||
|
7
on: November 04, 2024, 01:46:12 PM
|
||
| Started by trkeenan - Last post by GarageHawk | ||
|
Hi,
Thanks for your response. I'm looking for the most recent Firmware load. I think it was HomeRunner RBI, v1.19, 09/04/2014 02:01:05 PM. I could be wrong, but I think 2.18 was the last version of the application software. Can any one confirm? Bill |
||
|
8
on: November 04, 2024, 01:14:23 PM
|
||
| Started by trkeenan - Last post by brobin | ||
|
I have HomeRunner 2.18 if that's helpful. Happy to share it if you need it.
|
||
|
9
on: November 04, 2024, 01:08:26 PM
|
||
| Started by GarageHawk - Last post by GarageHawk | ||
|
I have the following JDS equipment that I would be willing to sell.
1ea. SG-1 Controller w/ telephone board 1ea. I/O Expander 1ea. Infrared Expander We can also repair most JDS HomeRunner X10/Insteon controllers. I would like to obtain the latest HomeRunner Firmware download. Please reply to contact me. Best regards, Bill |
||
|
10
on: November 04, 2024, 12:50:21 PM
|
||
| Started by trkeenan - Last post by GarageHawk | ||
|
I have the following JDS equipment that I would be willing to sell.
1ea. SG-1 Controller w/ telephone board 1ea. I/O Expander 1ea. Infrared Expander We can also repair most JDS HomeRunner X10/Insteon controllers. I would like to obtain the latest HomeRunner Firmware download. Please reply to contact me. Best regards, Bill |
||