Need Help Configuring a Security System

Started by x10sandy, December 16, 2006, 02:48:41 PM

Previous topic - Next topic

x10sandy

I need to moniter what is happening at my gate. The gate is at the end of a 300 foot driveway, that is set in a curve, from the house. I keep my gate locked and would like to be able to see who has pulled up to the gate. I need this to be accompanied with a chime to alert me and run it to two televisions.

When night time, I will need a floodlight that is motion activated.

Ideally, a wireless, motion activated camera, floodlight and chime is what I need.

KDR

Hi x10sandy and welcome to the community.

The problem I see with your setup is going to be range. You say the drive is 300 long. Is the gate at the end of the drive out of sight from the house? My thoughts on a cam are if you can see the gate from somewhere in the house you may be able to go with one of the cams that has a zoom. This would allow you to see who's at the gate from a distance and perhaps overcome the transmission range problem for the video. The other possibility is that a cam with zoom could be placed elswhere on the property to see the gate and still be able to get the RF to the house. The motion sensor issue for a light might work using the X10 floodlight unit PR511

I don't have a PR511 but if you do a search on the boards here you will find information on it and some of the issues others have had.

------------------- K D R
Note: "Guests" may read the X10 forum , but you must register to post!

When I'm online you can find me in the Home Automation Chat Room!

SMF spam blocked by CleanTalk