Topic: What happens when... Motion Sensor (Read 3800 times)

KDR · « **on:** October 23, 2006, 09:52:00 PM »

I have not tried this but I'm sure someone has...

If you take a motion sensor which has a Unit code + 1 for dusk/dawn and set the unit code to 16 what happens to the + 1 part since theres no 17?

All of mine are in service at the moment AND working so I didn't want to take one down to try it.

Tuicemen · « **Reply #1 on:** October 23, 2006, 10:16:40 PM »

If I remeber right it sends the unit code 1

-Bill- (of wgjohns.com) · « **Reply #2 on:** October 24, 2006, 01:07:21 AM »

Just tested a MS14A and Tuicemen is absolutely correct! When the unit code is set to 16, the dusk/dawn transmits unit code 1!

Now I just have to turn my porch light back off.

KDR · « **Reply #3 on:** October 24, 2006, 06:17:55 AM »

Thanks Tuicemen and Bill. I was expecting that on code 16 dusk/dawn would not operate, not go back to 1. Puts info in memory banks.

Brian H · « **Reply #4 on:** October 24, 2006, 06:52:51 AM »

Yes if it didn't loop around. Unit 16 would be the most popular code if you didn't want to deal with Dusk/dawn

News:

Author Topic: What happens when... Motion Sensor (Read 3800 times)

KDR

What happens when... Motion Sensor

Tuicemen

Re: What happens when... Motion Sensor

-Bill- (of wgjohns.com)

Re: What happens when... Motion Sensor

KDR

Re: What happens when... Motion Sensor

Brian H

Re: What happens when... Motion Sensor