A and B Channel

[craftman]

I recently added a few modules to my system to control my holiday lights and decorations.  I set them all up for B channel (B1, B2,  B3) and then put timers on them.  My timers for A channel work find but B channel will not turn on, will turn off, but not on, everything works fine from the computer interface...Hints?

[KDR]

You may first want to try plugging in one of your B modules in an outlet that you have an A plugged into that works on A. If the B module works there you may have a phase problem or noise problem. Give that a try and let us know how it went. Also if your controlling them from a remote be sure that the transceiver house code for A and B is checked under configuration for your CM15A.

I guess I should ask if that is what you have. AHP and a CM15A controller?

[Dan Lawrence]

Did you upload everything to the CM15A?  Go back and review all the new modules and their timers.

Also, If the addtional modules are only used at holiday times, create a new .ahx file for the holiday period. Load your regular file for most of the year, the holiday file when it is needed.

I have 6 modules on housecode B, all have timers and everything works.

Currently, I have 4 different files for certain times of the year