Contact | X10.com
Please login or register.

Login with username, password and session length

Author Topic: will MS14A work with RS 49-1000  (Read 3573 times)

CHAVEZ

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 2
will MS14A work with RS 49-1000
« on: December 02, 2006, 06:38:14 PM »
Hello, new here to the X-10 stuff.  I have had an RS 49-1000 unit in my home for a while and found a box of old X-10 components in the attic.  There is an MS14A motion detector and I was wondering if this would work with my unit to trigger the alarm.  So far I have had no luck in registering it.  Thanks!
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13295
Re: will MS14A work with RS 49-1000
« Reply #1 on: December 02, 2006, 07:00:53 PM »
No it is not a Security type sensor. I believe the console will act as a transceiver and pass the sensors commands back to the powerline if the house codes are the same. To control other standard X10 devices.
Logged

CHAVEZ

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 2
Re: will MS14A work with RS 49-1000
« Reply #2 on: December 02, 2006, 07:26:06 PM »
Thanks for the reply, Brian.  BTW, also thanks for the info from like almost 2 years ago regarding the external siren setup for the 49-1000.  I've yet to get to RS to buy the parts for this.  Did you ever do anymore experimenting with this?  Like putting a reed relay before the buzzer transformer? 

Thanks again!
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13295
Re: will MS14A work with RS 49-1000
« Reply #3 on: December 03, 2006, 06:37:07 AM »
No I never got back to the project. I can't remember if someone else may have tried it.
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.