To help explain my
Wish List post on
Motion Sensor Option, I thought I'd show the problem I see in
AHP Version 3.204.
For this example I am using using
BXVC (Bill's X10 Voice Commander) as the trigger.
NOTE: The problem is
NOT the method of trigger. (
I seen the problem on other triggers first.)
The trigger is for a
ConditionLESS Macro on address
E2 to turn my
Familyroom TV light OFF.
I set up a temporary
MS16A motion sensor on (
un-transceived) address
A7 in the
Familyroom for this test.
In the "
macro go.jpg" example below, you can see that all worked
OK... I was
still when I requested the light be turned off.
In the "
macro no go.jpg" example below, you can see the trigger for turning the light off is there, but because I
moved and
A7 On was transmitted, Macro
E2 to turn
J9 OFF (
Familyroom TV Light) did not execute.
Has anybody else see this?
Author
Topic: Motion Prevents Macro (Read 5332 times)