Contact | X10.com
Please login or register.

Login with username, password and session length

Author Topic: Battery power for video sender  (Read 18070 times)

lhkeller

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 2
Battery power for video sender
« on: January 02, 2007, 09:41:54 AM »
I would like to use the video sender on a video camera without using power adaptor in wall plug. How can I set up with a battery. ???
Logged

Puck

  • Advanced Member
  • Hero Member
  • ******
  • Helpful Post Rating: 171
  • Posts: 1799
Re: Battery power for video sender
« Reply #1 on: January 02, 2007, 09:48:47 AM »
lhkeller: What camera are you using (model number)?

I do believe X10 has a battery pack that can be used on some of their cameras. Other than that, the wall adapter should have the Output DC volts & current rating; you can use this to determine what you need for battery power.
Logged

lhkeller

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 2
Re: Battery power for video sender
« Reply #2 on: January 02, 2007, 10:02:51 AM »
I am using a Sony vx2000 ... not one from x10.  I will check adaptor for specifics. :-\
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13295
Re: Battery power for video sender
« Reply #3 on: January 02, 2007, 12:49:03 PM »
X10 makes a battery pack and I believe it is 12 volts. Uses 4 penlite batteries and has a small DC to DC converter in it.
No X10 signal controles to turn it on and off. Just a manual switch and the batteries have a 4 hour run time.
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.