Contact | X10.com
Please login or register.

Login with username, password and session length

Author Topic: [WTB] Module to Control Pool Pump  (Read 6552 times)

danfly

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 7
[WTB] Module to Control Pool Pump
« on: April 20, 2007, 06:13:47 PM »
What appliance module can I use for a pool pump? It is 2 HP and 120 volt / 11 amps, so about 1300 watts.
Logged

dave w

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 139
  • Posts: 6116
Re: [WTB] Module to Control Pool Pump
« Reply #1 on: April 23, 2007, 11:22:43 AM »
Limited choices. You could try an appliance module to see how long it would last. The starting current of the pump will probably weld the contacts.
The XPS3 wire in switch is 120V 20Amp.
Did you look at the smarthome.com site?
An alternative is to use an applaince module or a Universal module to energize a larger contactor to control the pump.

Logged
"This aftershave makes me look fat"
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.