Contact | X10.com
Please login or register.

Login with username, password and session length

Author Topic: XPS3 not responding to signals  (Read 3419 times)

reenesh

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 5
XPS3 not responding to signals
« on: July 28, 2007, 09:52:19 PM »
Hello everyone,

First thank you all for the past help, it had helped alot!

Now I am having problems with the xps3 flourcent module, where when I press the ON button it comes on, but then if I press OF, the lights don't turn off.. I have read online help documents on this and not sure which is the best approach to resolve it...do I need a noise reducer or passive phase shifter device?

THanks alot!
Logged

dave w

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 139
  • Posts: 6116
Re: XPS3 not responding to signals
« Reply #1 on: July 30, 2007, 12:24:13 PM »
Assuming you are NOT referring to the button on the switch itself, it is likely the fluorescent light making noise. You would need a filter between the switch and the light,  probably mounted at the light.
Logged
"This aftershave makes me look fat"

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13308
Re: XPS3 not responding to signals
« Reply #2 on: July 30, 2007, 04:16:57 PM »
Since the relay in it makes enough sound to hear. maybe try it on and off with the light disconnected. That may help and see if the light is making enough noise to stop the off signals from getting to the switch.
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.