Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[sashley]

Just wondering if anyone has tried this. Since the wired nightwatch camera ends with an RCA plug and the wireless receiver has an RCA plug leading to that, would I be able to just buy a Y splitter and hook it up through that? I'm connecting this to a PC and my wireless cameras work, but they just don't see anything at night, so I need to get a more sensitive night camera with less static. But when I saw the adapter for wired cameras to PC's, it was just going to a USB cable, which the wireless reciever is doing anyway. Let me know what you think.

Thanks in advance.

[Puck]

Since the wired nightwatch camera ends with an RCA plug and the wireless receiver has an RCA plug leading to that, would I be able to just buy a Y splitter and hook it up through that?

As long as your wireless receiver is on it will be outputting a signal (even when no wireless camera is transmitting). This signal will interfere with the wired camera's signal connected with the Y-adapter. This method will work, but you need to control the power to the receiver and the wired camera so that only one is on at any time.

[HA Dave]

Just a note: I have been using video senders and receivers on appliance modules for some time now.

[sashley]

Could you recommend a device that will alternate the power between the two devices?

[Puck]

Could you recommend a device that will alternate the power between the two devices?

As Dave_x10_L mentioned, you can use an Appliance Module to control the power to the wireless receiver. To control that Appliance Module, your going to need software like ActiveHomePro. If you only have one wireless camera that has a motion sensor for activation, you could get away with setting the address of the Appliance Module to that of the wireless camera.