Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[dchicken]

   Has anyone had this or a similair problem and found a cure?  If so please help!  I have a winxp, sp2, and the X10 3 cam pkg'
   After installing the software and hardware and countless days & nights setting it up, sending parts back and going thru 1. Multiview 2. Webview, 3.  Pan/Tilt Pro 4. Vanguard and now Sentinel and doing all x10 curealls i'm still fighting this ----ed "Run DLL as an app has a problem and needs to close" bug that shuts down the X10 crapp and prevents any of the programs from completing  their functions.

Before I installed Sentienel I had Vanguard down to where it would work as follows- Motion detected=VCR & Vanguard recording, Email received[motion det] cam A-2 off and A-1 on, 5 min. later VCR off, 7 min later Vanguard stopped recording & Email received {motion not det} and as soon as TM751 clicked "RunDll as app " came in and shuts VG down.


Can anyone explain how to get rid of this DLL error msg?

                                                                                           Many Thanks in advance
                                                                                            DCHICKENLITTLE@aol.com

[KDR]

What motion sensor are you using and what House/Unit code is it set at? Motion sensors have a House/Unit code + 1 and that might be effecting your setup.

^{----------------KDR}

[dchicken]

KDR'
    I'm useing the MS14A EagleEye, and it is set on A-1 {default}, controlling cam A-1

[x10junkie]

Dchicken, I have the same problem when I click to save a snapshot. It's the same Dll pop up that shuts everything down.