Please login or register.

Login with username, password and session length

Author Topic: Wireless a/v model mk11a  (Read 3090 times)

coraldaze

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 1
Wireless a/v model mk11a
« on: November 09, 2007, 02:39:42 PM »

Hi,

I am trying to install the above modules and find I cannot get audio or video.

I have downloaded software many times , have changed the channel info on each module. checked power supplies,etc..

Do I need to install seperate audi/video cables into the unit from pc???

I thought USB cable would suffice for the audio/video sigs ???

Thanks

Hans
Logged

HA Dave

  • Hero Member
  • *****
  • Helpful Post Rating: 175
  • Posts: 7127
Re: Wireless a/v model mk11a
« Reply #1 on: November 10, 2007, 09:02:56 PM »

Here are the directions for setup(<that's a link).

I hope that's helpful. I think... the kit you have assumes you have an RCA video out from your PC's video card. If you don't.... X10 does have a sender unit that connects to the VGA post of a PC.

If your connected correctly... and still not getting a signal to your TV... check your PC's video setting.
« Last Edit: November 10, 2007, 09:30:04 PM by Dave_x10_L »
Logged
Home Automation is an always changing technology
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.