Contact | X10.com
Please login or register.

Login with username, password and session length

Author Topic: New Style WS467, will not dim from ActiveHome  (Read 2765 times)

I Tried SEARCH

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 2
New Style WS467, will not dim from ActiveHome
« on: November 12, 2007, 09:39:14 PM »
I have purchased a batch of WS467's that came in with a date code of 07G30.

After installing them, and reading other posts, I've learned that these are the newer style that have the ability to dim at the switch.

The switches are wired to lights. The lights can be operated from the switch just fine. ActiveHome software works when commanding on / off / all lights on / all units off.

However, I cannot use ActiveHome software to dim the lights.

Any suggestions?

Thanks in advance.
« Last Edit: November 12, 2007, 10:32:19 PM by I Tried SEARCH »
Logged

Walt2

  • Advanced Member
  • Hero Member
  • ******
  • Helpful Post Rating: 28
  • Posts: 787
Re: New Style WS467, will not dim from ActiveHome
« Reply #1 on: November 13, 2007, 08:42:19 AM »
Quote from: I Tried SEARCH on November 12, 2007, 09:39:14 PM

However, I cannot use ActiveHome software to dim the lights.


In AHP, try defining the module type to be an LM14A.
Logged
* Sears Home Control System, Radio Shack Plug 'n Power, NuTone, Stanley LightMaker, BSR, HomeLink.
* Tecmar Device Master, CP290 (LightHouse), CM11A (AH), CM14A (AH2), CM15A (AHPro).

I Tried SEARCH

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 2
Re: New Style WS467, will not dim from ActiveHome
« Reply #2 on: November 13, 2007, 10:05:04 PM »
Switching to the Lamp Module does now allow the lights to be dimmed from ActiveHome software. Thanks for the tip.

Now I have one switch that isn't obeying any commands. It didn't work on Sunday, it worked yesterday, and not it is back to not working!!!!  ???
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.