Wall Outlet Stuttering Repair

Started by Oldtimer, December 31, 2006, 10:00:09 PM

Previous topic - Next topic

Oldtimer

Quote from: Oldtimer on August 12, 2006, 09:02:45 PM
OK my apologies.  Just checked my wall outlet modules out.  They are Radio Shack # 61-2685, probably at least eight years old.  I have no idea what prior X10 number that maps to.  Sorry for the confusion.  By the way if you have one of these and it's started to stutter when you turn it on I can tell you how to repair it.

Here's the verbal description of what I did to mine to fix the problem.  When you open the unit up you'll find that the upper (stationary) contact in the relay has bent further away from the lower (moveable) one over time because of repeated use.  Bend this down slightly so that it is closer to the moveable contact but not so close that it is on all the time.  You may have to play with this a bit so that you don't get it so tight that the mechanism has a hard time working.

KEYWORD LIST:  For searches.  61-2685, SR227, PA011
Having "fun" with X-10 since 1980.

Brian H

Thank you for the helpful information.
I believe the newer ones are different as some have reported the plastic actuation part breaking after being used for awhile.

tbird2340

Possible to get a picture of what part needs to be bent?

I have two of these outlets down.

Thanks!

Oldtimer

Quote from: tbird2340 on December 14, 2007, 12:45:11 PM

Possible to get a picture of what part needs to be bent?


Things are busy right now because of the holidays.  I'll post a picture as soon as I get a chance.
Having "fun" with X-10 since 1980.

Brian H

There are some helpful things on this web site including a Super Socket Repair. It sounds like a later revision from what Oldtimer has.
They are showing a plastic part that breaks.
http://www.idobartana.com/hakb/index.htm

Oldtimer

Quote from: Oldtimer on December 14, 2007, 09:17:50 PM
Quote from: tbird2340 on December 14, 2007, 12:45:11 PM

Possible to get a picture of what part needs to be bent?


Things are busy right now because of the holidays.  I'll post a picture as soon as I get a chance.

I'm sorry to report that I can't post a picture.  I have two of these as spares.  One has been repaired but I couldn't get it open again to take a picture because the Philips screw head has been creamed.  The other unit, which has the same part number, has a different kind of switch.
Having "fun" with X-10 since 1980.

SMF spam blocked by CleanTalk