Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[enlite]

I went to install a new WS467 today, however when I pulled my exisiting switch out, I have 4 wires to my switch. The instructions do not mention anything about having 4 wires.

Which ones do I connect to the blue/black of the WS467?

[steven r]

It looks like you may have a 3-way switch. Do you have any other switches at say the other end of the hall or room that control the same light? Does the switch have ON & OFF markings on it or is it blank?

I believe the WS467 is just a standard X10 switch and not for use in a 3-way application.

[enlite]

This is for my hallway that has 2 lights and there are 3 switches to turn them on/off.

Switch1 at bottom of stairs, Switch2 at top of stairs, Switch3 at the end of the hall near master bedroom.

Is there a different x10 switch for this type of application?

I will check for markings on the switch.

[KDR]

Welcome to the boards enlite.

What you have is called a 4-way switch configuration. The switch with the 4 wires going to it is the middle switch. Go to this Link [/size] and it will show you how to wire X10 masters and slaves to get a 4-way setup working and which model switches you will need.

^{----------------KDR}

[enlite]

Excellent!!! Thanks!!!

Welcome to the boards enlite.

What you have is called a 4-way switch configuration. The switch with the 4 wires going to it is the middle switch. Go to this Link [/size] and it will show you how to wire X10 masters and slaves to get a 4-way setup working and which model switches you will need.

^{----------------KDR}

(fixed link in KDR quote)

[steven r]

...The switch with the 4 wires going to it is the middle switch...

Don't count the ground wire. i.e. The pictured switch isn't the 4-way one.

...Go to this Link [/size]...

Your link, preceded with "http:", for some reason, didn't work for me but ftp://ftp.x10.com/pub/instructions/4-way-wiring.pdf did.

[KDR]

Your right steven r didn't see it was a ground. Just seen the white paint on the copper and didn't look back far enough. Doh!

His circuit is still a 4-way, so iI got that right.      I fixed the link, thanks. Thats what happens when you type replies first thing in the morning.

^{----------------KDR}

[zach1234]

I have the same wiring set up as him it is a 4 way. I dont think x10 makes a 4 way.

[Brian H]

I you can buy more companions and if wired correctly all can control the master. The link shows how to do it.

[zach1234]

I am done being Shocked. I have a bird now. I Tell him to turn on the light, he flys to the switch and turns it on.

(its a joke) - for the people that are slow.