Hi,
I just received my very first x-10 set, that contains the following TM13, Easytouch35 and AWM2, all from marmitek. obvious I'm an absolute newbie for this....
It seems that my TM13 doesn't do anything except warming up....
I did the following the TM13 is on house code A and should have address 1, if man might believe the manual
Then I pushed the 'house'-button & '1' & 'on' (=chan+) on the remote (which since it is set and reset again to default also on house code A)
Which all gave no reaction from the TM13.
Then to double check the module I plugged the AWM2 in, which (still according to manual) is default on A1. The same address as the TM13.
The AWM2 also didn't switch on or off by the remote but it can be triggered by the contacts and if all my assumptions are right, it should switch the TM13 relay together with his own? Which it doesn't.
Is it safe to say that I have a DOA (dead on arrival)? Or did I miss something
Thanks very much all of you!!!!!
Author
Topic: TM13 = DOA? (Read 4985 times)