Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[jipe63]

Hello,
I've got a CM11 and everything was ok. Now I use a CM15 with vista.

I've got 12 modules SW10 in my house (F1...F12).
I want to make Macro to open and close my module.
I write 3 Macro E1...E3 : E1 open all at 6h30, E2 close all except 2 in TV room at 20h30, E3 close the last 2 in TV room at 22h30 (Timer are on Macro)
Only E3 works....
There is no condition on Macro
I put delay in Macro to not send all order at the same time...

This morning I change the address of maco to F13-F14-F15
I will see tonight if it changes something.

I've you got an idea ?
Thanks

This is my Macro with new adress

Macro Report : 08/04/2008 07:56
      Macro                      NameTriggerModule(s)              Action
      OuvertureF13On          (F1) Cuisine Nord                 ON
                                       (F2) Cuisine Est                   ON
                                       (F3) Cuisine Sud                  ON
                                      Delay for 30 Seconds
                                       (F4) Baie Sejour                   ON
                                       Delay for 30 Seconds
                                        (F5) Terrasse                       ON
                                         (F6) Baie Salon                     ON
                                        (F7) Salon Ouest                   ON
                                         (F8) Salon Nord                     ON
                                         Delay for 01:30:00
                                          (F9) Ch1 Est                       ON
                                            (F10) Ch2 Sud                  ON
 
FermetureF14 On                 (F7) Salon Ouest                   OFF
                                           (F8) Salon Nord                     OFF
                                         Delay for 01:00
                                         (F1) Cuisine Nord                     OFF
                                           (F2) Cuisine Est                      OFF
                                          (F3) Cuisine Sud                       OFF
                                        Delay for 01:00
                                         (F9) Ch1 Est                             OFF
                                         (F10) Ch2 Sud                            OFF
                                        Delay for 01:00
                                          (F11) Ch2 Nord                           OFF
                                           (F12) Ch2 Ouest                        OFF
                                           Delay for 30:00
                                          (F4) Baie Sejour                          OFF

Fermeture SalonF15 On           (F5) Terrasse                              OFF
                                             (F6) Baie Salon                            OFF

[martin]

jipe63,

It should be working. You have attached timers to your macros - right? Try adding a 1 second delay between your modules in your macro.

Martin

[martin]

jipe63,

J’ai remarqué que les noms de tes modules / macros sont en français. Petites règles de base avec AHP avec lesquelles il faut composer lorsque le français est utilisé (expérience personnelle…) :

-   Aucun caractère accentué dans le nom des modules / macros – Important!
-   Modules / macros doivent tous avoir des noms différents même si le « trigger » est différent.

Martin

[jipe63]

Good evening,
thanks Martin to help me

I change all my module and macro names to have no accent and no space.
I put a delay of 5s between each order in the macros.

I will see tomorrow...

[jipe63]

Hello,
yesterday, everything was OK.... then it stopped !! the two last commands were not be send. I start my PC and I couldn't activate anything from activehome 

I went to bed. This morning I start my PC and I can manage everything from activehome, so I download all my macro in CM15 and I wait this evening.

I spend the same time to debug that I would spend to close and open my shutter in all my life 

bye

[jipe63]

Hello,

The macro sometime work sometime not...

This morning all is blocked : i have to remove the battery of the CM15 because i cannot command anything from activehome pro.
I download an other time all my macro : i suppress the long delay in macro to see...

I think that in some days my CM15 will be back to reseller ....

bye

[remulon]

AHP is by far and away the buggiest code I have EVER seen in a piece of commercial software. This stuff is strictly hobby grade, if you have something important you want to accomplish, stay away from x10 stuff.

Otherwise it is just a reasonably entertaining timewaster.

R

[Dan Lawrence]

I totally disagree with you. AHP is not "buggiest code I have EVER seen in a piece of commercial software".  I've never had a moments problem with it.

[dave w]

Dan, If that is you trying to be funny, at least put a smiley face on it. 

[jipe63]

Hello,

So i send my CM15 to the reseller, and he returns me a new one... but the result is the same : the macro and the timer make what they want
The interface works well in "manual" mode from PC even the macros, but when i store all in the interface the problems appear : Macros start but don't finish or don't start... Sometime a device is activate even if its code is not use...
I change my house code from F to D but it's the same
My device are SW10.

I see also that the interface doesn't store the good house identifier (in my case it's D and the hardware configuration says always A) The time remaining for battery is always on 48...

Do you think that could be VISTA the problem ?

JP

PS : sorry for my poor english