Dusk/Dawn control will these work together?

Started by pcman3550, July 12, 2008, 06:32:46 PM

Previous topic - Next topic

pcman3550

I have an Eagle Eye M14A motion sensor that I want to use to control my outside lights to come on at dusk and off at dawn.  The switch to the outside lights is controlled by a single pole switch inside.  If I replace that single pole switch with a Wall Switch Module (WS467) and with my existing Mini Transceiver (TM751) can these together control those outside lights to come on at dusk and go off at dawn? 

Brian H

If the WS467 is set to the Dusk Dawn Address it should work fine. Baring any X10 line signal problems from the TM751 to the switches installed place.
Incadescent type bulbs in the lights?

pcman3550

Yes, these are incandescent bulbs outside.  Thanks!

Brian H

You are welcome. Only other thing I can think of. If the lights shine on the motion sensor. It is possible for them to cycle on and off as it thinks the sun is rising and setting rofl

SMF spam blocked by CleanTalk